Chemical Water Treatment for Cooling Towers—Is It the Right Choice?

Have you seen those giant towers that are installed outside factories and on top of large buildings? These are cooling towers that serve a very important purpose. Simply put, a cooling tower is a heat exchanger that brings water in to direct contact with air, thus causing the temperature of the water to drop. When air and water come in to direct contact, a very tiny percentage of the water is evaporated from the surface. Most of the water that is pumped in to the cooling tower has already been heated due to some industrial processes.

The water is sprayed through nozzles in to the cooling tower, so as to bring the maximum amount of water in contact with air. The excess flow of water through the thin pipes and nozzles can lead to some serious problems. Over the passage of time, the amount of water that flows through these pipes begins to decrease considerably.

Why Does This Happen?

In most cases, the water flowing through the pipes has a very high mineral content. As the water continues to flow through the pipes, it leaves behind small deposits of limestone, calcium and magnesium around the sides. This decreases the circumference of the pipe and significantly limits the amount of water that can flow the pipe. Water that has a very high mineral content is known as hard water. In industries and factories where the flow of water can have a serious impact on operations, hard water can reduce the amount of water that goes in to the cooling towers. That’s why many factories opt for chemical water treatment for cooling towers.

With ScaleBlaster, you don’t have anything to worry about. Rather than using water softeners and opting for chemical water treatment for cooling towers, the ScaleBlaster offers a maintenance-free solution. All you have to do is install our ScaleBlaster to the water supply, and you are good to go! We guarantee that limestone will no longer form in the pipes, and the amount of deposits that have already been made will also be significantly reduced.

Why Us?

We understand that many factory owners end up spending lots of money on chemical water treatment for cooling towers. However, with our ScaleBlaster, you can forget about chemical water treatments altogether! Our product is maintenance and chemical free, and all you have to do is pay a one-time fee in order to buy the product. In fact, we also give a 90-day money back guarantee, so if you are not satisfied with the quality of our product, we will just return your money back to you! However, we guarantee maximum water flow within a few days only!